Props, Model Making & Sculpture

3D Creations have designed and built props, models and sculptures for many different clients including ITV’s X-factor, oversized products for effects and coats of arms.

Iron Maiden’s KING EDDIE

 This is a copy of the King Eddie head taken from my original mould we made back in the 1990s and was commissioned by a private collector in Denmark for his Iron Maiden museum. It is exactly like the one...

Iron Maiden's KING EDDIE - 3D Creations

Hansel & Gretel

 Hansel & Gretel for Great Yarmouth Pleasure Beach fun park.We made these figure in fibreglass & resin wash. Made without moulds and modeled by hand by Ian Westbrook, for our local Fun Park.They stand...

Hansel & Gretel - 3D Creations

18th Century Italian bust

 The Stately home of Lord & Lady Somerleyton in Suffolk commissioned us to restore this mid 18th Century Italian bust that is displayed in the grounds of the hall.  This 18th century cast iron bust...

18th Century Italian bust - 3D Creations

for Aisha – Large baby food pouch & balloon

Our client wanted a 4ft replica of a baby food pouch, for a publicity event. We were also asked to make a 5ft balloon that was also going to be seen from all angles.The baby food pouch has a vinyl graphic with a soft inside like a real food pouch, along with a very carefully detailed hand crafted cap on the top.The balloon is a GRP with a real wicker basket. It has been hand painted with thick string for fine detail on the balloon for a real stitching effect.

for Aisha - Large baby food pouch & balloon - 3D Creations

Coat of Arms

This was a commission to re-create a family coat of arms for the end of a canopy at the front of this period house in Suffolk. Our in-house sculptor Scott achieved this by sculpting from red clay then making a silicone rubber mould and re-casting out of GRP.

Coat of Arms - 3D Creations

Bean Stalk

  We designed and made this 12 ft high beanstalk with spongy leaves for a promotional event in London. This is just one of our smaller beanstalks; some grow up to 25 ft...

Bean Stalk - 3D Creations

Go Go Gorillas – Unveiling

We were commissioned to create the top section of the Empire State building with King Kong at the top to launch this event outside the Odeon cinema. The structure stands 6.5 m high with our King Kong at the top, sculptured by 3D Creations Mark...

Go Go Gorillas - Unveiling - 3D Creations

Go Go Gorillas – On-site setup

We were commissioned to create the top section of the Empire State building with King Kong at the top to launch this event outside the Odeon cinema. The structure stands 6.5 m high with our King Kong at the top, sculptured by 3D Creations Mark...

Go Go Gorillas - On-site setup - 3D Creations

Go Go Gorillas – Workshop Build

  The Empire State building stands 6.5 m high with our King Kong at the top, sculptured by 3D Creations' Mark Keene. The photos below show: Sculpting the 2.5m high gorilla from a block of poly. Workshop construction of the support frames with the...

Go Go Gorillas - Workshop Build - 3D Creations

Gothic Throne

  A Gothic throne made in wood and painted with gold leaf highlights. We hire this out for special occasions. It measures 2m high x 60cm wide x 70cm deep....

Gothic Throne - 3D Creations

Custom Made Furniture

    An example of our custom made furniture for Sir Peter Hall's Theatre Company'Time and the Conway's' at London's Savoy Theatre starring Penelope Keith. Special cushioning was built in to help Penelople Keith, who was wearing tight corsets to sit...

Custom Made Furniture - 3D Creations

Spice Girls Tour

    This was the last Spice Girls gig they did (before reforming!) which featured our giant 'Spiceicle'. It was carved from polystyrene and then moulded in clear fire retardant fibreglass. Moving lights were set inside a ring of truss-work and suspended...

Spice Girls Tour - 3D Creations

BBC Radio One

    Digital launch of "One Nation" could be seen on the streets of London. We had to blend and match the broken base of each of our No.1 props to the location pavement or road. The effect was as if these 12 ft high number "1s" that had dropped in from the...

BBC Radio One - 3D Creations

MAXVIEW giant remote control

  Maxview required us to build an exact replica of their TV remote control, but 20 times larger. We made this from fibreglass, metals and resins. The buttons were sprung loaded and cushioned to give a feel of the real...

MAXVIEW giant remote control - 3D Creations

Giant Lobster

  This Giant Lobster was made by scaling up a live Lobster which we kept in a large fish tank in our workshops. Every small detail was re-created by enlarging the lobster by five times . We made the claws snap and the creature rotated around on a turntable as...

Giant Lobster - 3D Creations

Props and models

  1. Fake grave stone 2. Giant red stags for Jim Bean Whisky 3. Giant pizza slice 4. The Bacchino Statue - 3 feet high 5 & 6. More props and large scale model making for Iron Maiden World Arena Tour 7. 10 ft high fibreglass section of Stone Henge with the...

Props and models - 3D Creations
instagram default popup image round
Follow Me
502k 100k 3 month ago
Share